Wire Shelf Dividers — Anti-Slip Product Separators

L: 350/400/450/500mm

Core Advantages

    Anti-slip design – Rubber anti-slip pads or textured surfaces on the divider base. Pads contact the shelf surface with a friction coefficient of 0.5 to 0.7 under dry conditions. When products tip over or are compressed, the divider does not slide on the shelf surface, maintaining zone stability.

    Product separation function – Dividers stand vertically on the shelf surface with heights ranging from 80 to 150 mm, creating a physical barrier. Divides shelf panel into independent zones, preventing different product categories from mixing. Suitable for round products (beverage bottles, cans) and small-dimension boxed items.

    Length specification matching – Four lengths correspond to different shelf depths. 350 mm for 350 mm depth shelves; 400 mm for 400 mm; 450 mm for 450 mm; 500 mm for 500 mm. After installation, the divider front should be flush with or inset 5 to 10 mm from the shelf front edge.

    Mounting compatibility – Two mounting structures available: mesh foot type (for wire mesh shelves, feet insert into mesh holes) and shelf clamp type (for wood or plastic shelves, clamping thickness 10 to 25 mm). Installation requires no tools.

Product Features

    Material – Carbon steel wire, diameter options: 3.0, 3.5, 4.0, 4.5 mm. Frame edge material: same diameter or reinforced to 5.0 mm.

    Length options – 350, 400, 450, 500 mm (total horizontal length of divider).

    Height options – 80, 100, 120, 150 mm.

    Width (thickness) – 5 to 10 mm (single-layer construction).

    Mesh pattern – Vertical wire spacing: 25 to 50 mm. Horizontal wire spacing: 50 to 100 mm.

    Surface finish – Electrostatic powder coating (black, white, gray) or hot-dip galvanizing.

    Anti-slip pad specifications – Material: TPR, silicone, or EVA. Thickness: 1.0 to 2.0 mm. Located on divider base where it contacts the shelf surface. Pad attachment: snap-in or adhesive.

    Mounting types:

        Type A: Mesh foot type – 2 to 4 feet at base, foot length 15 to 25 mm, compatible with mesh hole diameters 5 to 10 mm. Feet wrapped with anti-slip pads.

        Type B: Shelf clamp type – C-clamp at base, clamping thickness 10 to 25 mm, clamp inner surface with anti-slip pad.

    Lateral load capacity – Permanent deflection less than 2 mm when a 50 Newton force (approx. 5 kg force) is applied to the center of the divider. Divider does not displace on the shelf surface.

    Coverage capacity per divider – Divides a shelf into 2 to 3 independent zones when used with multiple dividers.

    Accessory options – Label holder (clips to front or top of divider), rubber end caps (covers sharp corners), extended feet (for thick mesh shelves).

Application Scenarios

    Bottled water, carbonated beverage, and juice category separation in supermarket beverage sections.

    Canned coffee and energy drink division in convenience store coolers.

    Hardware parts bins and small accessory sorting on warehouse shelving.

    Canned goods and spice bottle organization in home storage cabinets.

    Medicine box and supplement bottle categorization on pharmacy shelves.

Frequently Asked Questions and Precautions

Frequently Asked Questions

Q: Are anti-slip pads still effective on wet or greasy shelf surfaces?
A: TPR and silicone pads have a friction coefficient of 0.5 to 0.7 under dry conditions. On wet or greasy surfaces, the coefficient may drop to 0.2 to 0.4, reducing anti-slip effectiveness. For fresh food sections or areas with potential grease contact, use mesh foot-type dividers (mechanical fixation through mesh holes) rather than relying on pad friction.

Q: Do anti-slip pads age or detach over time?
A: Under normal use conditions (0 to 40°C, no direct UV exposure), pad service life is 12 to 24 months. Aging signs include hardening, cracking, or loss of elasticity. Snap-in pads can be removed and replaced. Adhesive pads can be reattached with specialized glue after detachment. Inspect the pad condition every 12 months.

Q: Can dividers completely prevent products from falling off the shelf?
A: Dividers block products from rolling off the shelf edge when subjected to external forces (customer loading/unloading, other products tipping over), while maintaining their own position without sliding. They cannot completely prevent the intentional pushing of products. Taller dividers provide stronger fall prevention. Select divider height at 50% to 70% of product height.

Precautions

    Before installation, confirm the divider length matches the shelf depth. Dividers that are too short (30 mm+ shorter than shelf depth) create a gap between the divider rear and shelf back wall, allowing products to roll off from the rear.

    Before installing pad-type dividers, clean the shelf surface to remove dust, oil, and moisture. Contaminated surfaces reduce the pad friction coefficient.

    Install dividers perpendicular to the shelf front edge, parallel to the edge. Angled installation creates inconsistent zone widths and may allow divider displacement due to uneven force distribution.

    Inspect pad adhesion and integrity monthly. Replace dividers with detached, hardened, or cracked pads.

    Clean the metal parts of the dividers with a damp cloth. Avoid oil-based cleaners on anti-slip pads, as grease reduces friction performance. Clean pads with neutral detergent, air dry, then reinstall.

    The top edge of dividers consists of cut wire ends, which may have burrs. Wear protective gloves when handling or cleaning. Optional rubber end caps cover sharp corners.

    These dividers are not intended for shelves with significant slopes (exceeding 5 degrees), as the gravity component on products may cause divider sliding or failure.