Shelf Hanging Basket — Expands Storage Capacity and Saves Space

L: 900/1000/1200mm

Core Advantages

    Space expansion function – Basket installs beneath shelf panels, utilizing vertical gaps between the panel and products below (typically 100 to 200 mm). Does not occupy the product display area above the panel, increasing shelf vertical space utilization by 20% to 40%. Suitable for backup products, promotional giveaways, or packaging materials.

    Length specification matching – Three lengths correspond to standard single-shelf panel widths. 900 mm for 900 mm wide panels; 1000 mm for 1000 mm; 1200 mm for 1200 mm. After installation, basket ends are flush with or inset 5 to 10 mm from panel edges.

    Mounting compatibility – Two installation structures: hook type and clip-on type. Hook type: L-shaped hooks on the upper rear edge of the basket, designed to hang directly on the shelf front edge or beam. Clip-on type: spring-loaded clips on both sides of the basket, inserting into upright holes. Installation requires no tools; lift upward for removal.

    Open design – The basket base and sides feature a mesh structure with 50% to 70% open area. Allows easy viewing of contents; dust and liquids drain through the bottom. Mesh spacing: 25 to 50 mm, preventing small items from falling through gaps.

Product Features

    Material – Carbon steel wire, diameter options: 3.5, 4.0, 4.5 mm. Frame edges reinforced to 5.0 to 6.0 mm.

    Length options – 900, 1000, 1200 mm (total horizontal length of basket).

    Width options – 150, 200, 250 mm (front-to-back depth of basket).

    Height options – 80, 100, 120 mm (vertical depth of basket).

    Mesh pattern – Vertical wire spacing: 25 to 40 mm. Horizontal wire spacing: 50 to 80 mm.

    Surface finish – Electrostatic powder coating (black, white, gray) or hot-dip galvanizing.

    Mounting types:

        Type A: Hook type – 2 to 4 L-shaped hooks on upper rear edge, hook depth 15 to 25 mm, fits panel thickness 1.5 to 3.0 mm

        Type B: Clip-on type – Spring-loaded clips on both sides, fits upright holes (8×12 mm or 10×15 mm)

    Base support – Reinforced cross wires or bottom cross-bracing to prevent sagging under load.

    Load capacity – 5 to 15 kg per basket under evenly distributed load, depending on dimensions.

    Accessory options – Label holder (clips to basket front), dividers (insert into basket), anti-slip mat (placed on basket base).

Application Scenarios

    Backup product storage (beverage cases, snack packs) beneath supermarket shelf panels.

    Shopping bag and promotional giveaway storage beneath the convenience store checkout counter shelving.

    Small accessory, instruction manual, and packaging supply storage on warehouse shelving.

    Plastic wrap, paper towel, and seasoning packet storage beneath kitchen cabinets.

    Document, stationery, and notebook storage in under-desk hanging baskets in offices.

Frequently Asked Questions and Precautions

Frequently Asked Questions

Q: Does basket installation interfere with access to products below?
A: After installation, the clearance between the basket bottom and the top of products below should be at least 30 to 50 mm to allow normal access. Measure available height beneath the shelf panel before installation. Recommended available height = basket height + 40 mm minimum. If inter-shelf clearance is insufficient, choose a lower-profile basket (80 mm or less) or adjust shelf height.

Q: Can hook-type baskets detach from the shelf during product loading/unloading?
A: Hook-type baskets rely on their own weight and the weight of contents to keep hooks tight against the shelf edge. Correct installation requires hook depth at least 1.5 times the shelf panel thickness. When loading or unloading, support the basket front with one hand to avoid pulling downward. Frequent up-and-down shaking may cause hooks to disengage. For increased security, use clip-on type baskets with anti-detach locking tabs.

Q: Does the rated load include the basket's own weight?
A: Rated load refers to the net weight of products placed inside the basket, excluding the basket's self-weight. Example: a basket rated at 10 kg with a self-weight of 2 kg results in a total weight of 12 kg. Before installation, verify that the shelf edge or upright supports can withstand the combined total weight.

Precautions

    Before installation, confirm basket length matches shelf panel/beam dimensions. Under-length baskets create gaps at both ends; over-length baskets cannot be installed.

    Install the baskets at the level. Angled installation causes products to slide to the lower side, increasing local load and potentially causing hook bending or base sagging.

    Do not exceed the rated load per basket. Overloading causes permanent base sagging, hook bending, or clip failure.

    Inspect the hook or clip fixing status monthly. Replace baskets with bent hooks or loose clips.

    Clean with a damp cloth. Wire baskets can be pressure-washed; tilt to drain after washing to prevent water accumulation and rust at connection points.

    For small products (smaller than the mesh spacing), items may fall through gaps. Use fine-mesh liners or solid liners on the basket base.

    This basket is not intended for liquid containers (open bottles/jars). Liquid leaks may drip onto products below, causing contamination.