Pegboard Double-Wire Hook: Dual-Rod Design for Heavy Loads—Secure and Non-Slip

L:100/150/200/250/300/350/400(mm)

Core Advantages

    Dual-Bar Support Structure: Two parallel metal bars share the load, resulting in lower point contact stress compared to single-hook designs, reducing the risk of localized bending.

    Installation Stability: The tail design matches the gridwall opening dimensions, maintaining directional orientation and controlling lateral movement during use.

    Even Load Distribution: Merchandise weight is shared across two support points, suitable for wide hanging holes, flexible packaging, or non-rigid items.

    Length Coverage: Increments of 50mm from 100mm to 400mm cover products of varying widths and thicknesses.

Product Features

The product is offered in seven length options: 100mm, 150mm, 200mm, 250mm, 300mm, 350mm, and 400mm. Installation is achieved by inserting the tail into gridwall openings or securing via back-clip (depending on version). The parallel dual-wire structure is suitable for products with dual holes or wide hanging openings, as well as bagged or flexible packaging. The bar ends feature an upward bend or anti-drop bend (depending on batch), with both bars treated identically. Wire diameter is consistent, and the spacing between the two bars is fixed. Surface finishes include electroplating or powder coating, selectable based on environmental requirements.

Application Scenarios

    Apparel retail stores for backpacks, handbags, belts, hats, and other items with hanging loops.

    Pet supply stores for leashes, harnesses, pet clothing, and toy sets.

    Hardware or tool retail stores for tool sets, extension cord reels, and safety equipment.

    Promotional or temporary display areas for bulk-packaged merchandise such as family-size household items and gift bags.

Common Questions and Solutions

Question: Merchandise becomes stuck between the two bars or swings excessively.
Possible cause: Mismatch between the bar spacing and the product hanging hole width or packaging thickness. Measure the hanging hole width or packaging edge thickness and select a hook version with corresponding bar spacing.

Question: The hook loosens or shifts on the gridwall.
Possible cause: Mismatch between the tail design and the gridwall opening dimensions, or incomplete engagement. Confirm that the gridwall spacing (commonly 25mm × 25mm or 50mm × 50mm) matches the hook version, and check that the tail is fully inserted or clipped in place.

Question: One of the two bars shows bending deformation.
Possible factor: Uneven load concentrated on a single bar, or the vertical projection of the merchandise weight deviates from the center of the dual-bar assembly. Adjust the merchandise center of gravity to sit between the two bars, or use a shorter hook length.

Related Precautions

    Verify that the gridwall opening spacing matches the hook tail design before installation. Mismatched grid specifications may cause insecure attachment.

    The total load per hook should not exceed 80% of the tested limit to maintain parallel bar alignment.

    Clean with a soft cloth and neutral detergent. Avoid abrasive materials or strong acid/alkali cleaners.

    Not suitable for products without hanging holes or for products with hanging hole width exceeding 1.5 times the fixed bar spacing.