Slatwall Double-Wire Hook — Securely Displays Tagged Items Without Slipping

L:100/150/200/250/300/350/400(mm)

Core Advantages

    Dual-Bar Support Structure: Two parallel metal bars share the load, keeping the tag facing forward and reducing deflection compared to single-hook loading.

    Anti-Slip Design: The bar ends feature an upward bend or stop structure, reducing the probability of carded items sliding off during access.

    Installation Stability: The dual-prong tail engages with the slatwall groove, controlling lateral movement after insertion.

    Length Coverage: Increments of 50mm from 100mm to 400mm accommodate tagged cards or packages of varying widths.

Product Features

The product is offered in seven length options: 100mm, 150mm, 200mm, 250mm, 300mm, 350mm, and 400mm. Installation is achieved by inserting the dual prongs into standard 3-inch slatwall grooves. The parallel dual-wire structure is suitable for carded packaging with hanging holes and double-hole bagged items. The bar ends feature an upward bend or anti-drop bend (depending on batch), with both bars treated identically. Wire diameter is consistent, and the spacing between the two bars is fixed. Surface finishes include electroplating or powder coating, selectable based on environmental requirements.

Application Scenarios

    Convenience stores or supermarkets for carded items such as batteries, razor blades, adhesives, and twist ties.

    Hardware retail stores for small tool accessories, screw packs, and wall anchor kits with carded packaging.

    Electronics accessory retail stores for USB cables, headphone pouches, adapters, and similar carded items.

    Home goods or general merchandise stores for hanging cleaning supplies, small hardware items, and locks.

Common Questions and Solutions

Question: Carded merchandise does not stay vertical on the dual bars.
Possible cause: The bar spacing is wider than the hanging hole diameter, or the card material is too flexible. Select a hook version with narrower spacing, or add a backing stiffener behind the card for additional support.

Question: Merchandise slides off the bar ends.
Possible cause: Insufficient anti-drop bend height, or the hanging hole diameter is too large. Select a batch with a taller end stop, or replace with carded packaging that has smaller hanging holes.

Question: The hook loosens in the slatwall groove.
Possible cause: The groove width exceeds the design range, or the dual-prong spacing does not match the groove. Confirm that the slatwall uses standard 3-inch slots (groove width approximately 5-6mm). Non-standard slots require compatible hooks.

Related Precautions

    Verify that the slatwall groove spacing is 3 inches (approximately 76.2mm) before installation. Mismatched groove types may cause insecure insertion.

    The total load per hook should not exceed 80% of the tested limit to maintain parallel bar alignment.

    Clean with a dry or slightly damp soft cloth. Avoid soaking or using acidic cleaners.

    Not suitable for products without hanging holes or for items with damaged card holes.