Premium hanging display rack with mesh and back panel for jewelry and snacks.

custom made

Core Advantages

    Wall surface utilization – Wall-mounted installation leaves floor space unused, suitable for aisles, behind checkout counters, or wall areas.

    Product categorization – Mesh panel accepts hooks for hanging bagged snacks or necklaces; back panel area can accommodate small shelves for boxed items.

    Visibility – Mesh openings allow partial rear visibility of products, reducing obstruction during customer pick-up.

    Installation method – Back panel includes pre-drilled mounting holes for expansion bolts into concrete or brick walls.

Product Features

    Structure composition – Front metal mesh panel combined with a solid back panel, connected via welding or bolts.

    Mesh specifications – Mesh hole size 10×10 mm or 15×15 mm optional, wire diameter from 1.5 to 2.5 mm.

    Back panel material – Cold-rolled steel sheet, thickness from 0.6 to 1.0 mm.

    Surface finish – Electrostatic powder coating, available in black, white, silver gray, or specified RAL colors.

    Mounting accessories – Optional straight hooks, bent hooks, small shelves (100 to 200 mm width), acrylic label holders.

    Dimensions – Width from 300 to 1200 mm, height from 400 to 900 mm, depth from 80 to 200 mm (customizable range).

    Load limitation – Recommended per-hook load not exceeding 2 kilograms. Total unit load not exceeding 15 kilograms, depending on wall fixation conditions.

Application Scenarios

    Jewelry store wall displays for necklaces, bracelets, and earrings.

    Convenience store or snack shop hanging displays for small-format snacks (chip bags, candy hanging cards).

    Boutique or market stall accessory displays (scarves, sunglasses, keychains).

    Check out the side wall as a promotional small-item hanging rack.

Frequently Asked Questions and Precautions

Frequently Asked Questions

Q: Can the mesh panel and back panel be ordered separately?
A: The mesh and back panels are provided as a combined unit. Separate mesh-only or back-only orders can be requested as a customization.

Q: Are hook spacing adjustments possible?
A: Hooks are plug-in type and can be repositioned in integer multiples of the mesh hole spacing (10 or 15 mm).

Q: Is this rack suitable for humid environments?
A: The standard powder coating is intended for dry indoor environments. For areas with potential moisture exposure (such as near beverage sections), galvanized treatment or water-resistant powder coating should be specified.

Precautions

    Confirm the wall is solid (concrete, solid brick) before installation. Do not mount on drywall or hollow walls unless using dedicated hollow wall anchors.

    Per-hook load must not exceed 2 kilograms. Hanging bottled liquids or heavy metal products is not recommended.

    Inspect hook-to-mesh contact points monthly to detect loosening or deformation caused by repeated product removal.

    Clean the back panel with a dry or slightly damp cloth. Prevent water from entering the gap between the mesh and the back panel.