Multi-Bead Anti-Drop Display Hook for Supermarkets

L:100/150/200/250/300/350/400(mm)

Core Advantages

    Bra-specific front design – Curved double-fork or single-fork design at the front, fork width 15 to 25 mm, fork depth 20 to 30 mm. Bra straps or back closures seat securely in the fork, preventing product detachment during loading and unloading. Fork edges are rounded to avoid fabric damage.

    Integrated label holder – Label holder located at the hook base or beneath the shaft, with display area of 50×30 mm or 75×40 mm. The transparent front cover is a flip-up type, allowing label changes without hook removal. Label holder angle relative to hook shaft: 15 to 30 degrees, facing the customer aisle.

    Anti-slip design – Shaft surface optionally covered with a rubber anti-slip sleeve, increasing the friction coefficient with bra straps. Sleeve material: TPR or silicone, thickness 0.5 to 1.0 mm. Versions without sleeves achieve anti-slip through tip uptilt (10 to 20 degrees).

    Light-load compatibility – Per-hook load range: 1 to 3 kg, suitable for lightweight apparel, including bras, lingerie, swimwear, and scarves. The 100 mm length accepts a 3 kg static load. For the 400 mm length, permanent deflection is less than 0.3 mm with a 1 kg load applied at the tip.

Product Features

    Material – Carbon steel wire, diameter 3.5 to 5.0 mm.

    Length specifications – 100, 150, 200, 250, 300, 350, 400 mm (straight-line distance from mounting surface to fork front).

    Front-end types:

        Type A: Curved double-fork (fork width 20 mm, fork depth 25 mm)

        Type B: Single-fork with retaining bump (fork width 15 mm, upward bump inside fork opening)

        Type C: Straight shaft with ball tip (for bra products with hang tags)

    Surface finish – Electrostatic powder coating (black, white, silver gray, champagne) or hot-dip galvanizing.

    Rear mounting types:

        Slatwall type: fits 12.7 mm slot width / 25.4 mm spacing

        Grid panel type: dual-slot, fits 5×5, 10×10, 25×25 mm hole patterns

    Label holder specifications – Display area: 50×30 mm or 75×40 mm. Transparent cover material: PET or PVC. Label holder attachment: bolt-fixed or integral welding.

    Anti-slip sleeve (optional) – TPR or silicone material, covering 50 to 100 mm of front shaft, wall thickness 0.5 to 1.0 mm.

    Per-hook load capacity – 1 to 3 kg, decreasing with length. 100-150 mm: 2.5-3 kg; 200-300 mm: 1.5-2 kg; 350-400 mm: 1-1.5 kg.

    Compatible product types – Bras, lingerie, swimwear, camisoles, scarves, neckties, and lightweight handbags.

Application Scenarios

    Bra and lingerie display in supermarket apparel sections.

    Wall slatwall displays in lingerie specialty stores.

    Brand counters in department store lingerie floors.

    Sports bras and swimwear are displayed in sporting goods stores.

    Apparel clearance sections in discount stores.

Frequently Asked Questions and Precautions

Frequently Asked Questions

Q: What is the usage difference between the curved double-fork and the single-fork with a retaining bump?
A: The curved double-fork is suitable for strap-style bras, with each strap seating in one of the two forks for even weight distribution. The single-fork with retaining bump is suitable for back-closure bras or bras with a single hanging loop; the retaining bump prevents products from sliding toward the hook base. Before bulk ordering, provide sample photos of the bras to be displayed for front-end type confirmation.

Q: Does the rubber anti-slip sleeve stain or damage the bra fabric?
A: TPR and silicone are inert materials that do not cause dye migration when in contact with common bra fabrics (cotton, polyester, spandex, nylon). The sleeve surface is smooth or finely textured and does not snag fabric. However, prolonged contact (exceeding 12 months) may leave slight compression marks on light-colored fabrics from dark sleeves. Rotate sleeve positions periodically.

Q: Can the label holder accommodate folded product information cards?
A: The standard label holder display area is 50×30 mm or 75×40 mm, designed for single-layer paper labels (thickness 0.1 to 0.3 mm). For folded cards (double or triple layers), a thickened label holder with 1.5 to 2.0 mm capacity is available as an option.

Precautions

    Do not exceed the per-hook load rating for the corresponding length. Bra and lingerie products typically fall within this range, but calculate total weight when hanging multiple items (e.g., 5 stacked bras).

    When hanging, gently seat bra straps or back closures into the fork. Avoid forceful pulling, which may deform the fork or scratch the coating.

    Install correctly based on the rear mounting type. For slatwall type: insert vertically into the slot and press down to lock. For grid panel type: fully insert slots into grid holes and rotate 90 degrees.

    Inspect fork shape integrity monthly. Replace hooks if the fork opening exceeds the original width by more than 10% (deformation), as this may cause product detachment.

    Clean with a dry or slightly damp soft cloth. Avoid cleaners containing bleach or strong alkalis on anti-slip sleeves or coated surfaces.

    Rubber anti-slip sleeves may harden or crack after extended use (12 to 18 months). Replace if the sleeve function is compromised.

    These hooks are not intended for products with metal hooks (e.g., hangers). Repeated friction between metal hooks and the fork will accelerate coating wear.